Showing posts with label blog hop. Show all posts
Showing posts with label blog hop. Show all posts

Tuesday, February 2, 2021

New Die Release - Folio Fun My Way

 It’s always fun creating with Eileen Hull dies, but really exciting, interesting and fun when there are brand new designs.  

The newest Eileen Hull dies released by Sizzix are the Folio, Mandala and Folio Page, Pocket and Flowers. I will be showing how I combined these dies for my creation. 



Though I will not be giving step-by-step instructions, this post will give a description of the process I used. 

When creating projects with Sizzix dies I have a tendency to try to combine a variety of materials and also play around with with the designs of the dies by altering them or combining them with others.  

The folio die will likely become another favorite! I think you will see that with the creations by the  others participating in this blog hop.  It’s always inspiring to see the ideas shared. This project begins of course with the folio die-cut design. It does have a old, shabby distressed look because of the materials used, plus the surface techniques used. The addition of the mandala design, the red, wool hearts and ribbon each add a little touch of warmth to the finished project.

  • This version has a spine that extends as far as possible. This gave me the opportunity to include several sections inside.
  • The outside of the folio was painted with a metallic copper paint. Brushed over with a wash of brown paint. Old dictionary pages are torn and applied to the inside of the folio cover with gel medium.
  • Corrugated board is cut to fit the front and back covers, as well as the front and back inner flaps.  
  • Apply adhesive for foiling sheets randomly into the corrugated pieces. Press foiling sheets of choice to add bits of the metallic foil on the covers. 
  • Use glue or adhesive sheets cut to size to add the covers and flaps to the folio.  
  • Cut a mandala design from a copper colored paper, backed with adhesive for the front cover. 
  • Cut the same mandala design from another type of paper for the back cover.  Gel medium was used to apply the design to the back. Heart shapes were cut from a felted wool sweater. Two are layered to the front cover, one to the back. A ribbon tie is added for a closure.

The inside has a variety of sections

  • The first section is enclosed as a holder. A couple folders were made to be inserts into the holder. Each folder has a tab added to the edge for removing and inserting them into the holder. 
  • The next insert is a folder made from card stock cut from an older Eileen Hull scoreboard die (Album). Pockets are added in two different directions from coordinating decorative paper.

  • The next insert is made with the older album die, cut from a acrylic folder and altered to create a narrow album insert.  The covers are embellished with the mandala cut from white copy paper. Use a gel medium to adhere them. Pages are made from copy or newsprint paper. 

  • The next two inserts are small lined notebooks. Each is covered with coordinating decorative papers. 

  • The last folded section also hold a small covered notebook and has a pen holder. The pen holder shape is from the Journal die. TIP: One or more pocket folder could be added to this section too. 

Finishing the folio
Follow along the list of participants to see a wonderful variety of ideas and styles. 
***A NOTE FROM EILEEN ***
Welcome to the Chapter 1 Eileen Hull/Sizzix Release Party Blog Hop! Just wait till you see all of the fun options the new ScoreBoards Folio Journal die has in store for you! You will also love the Mandala and Folio Page, Pockets and Flower Thinlits dies that coordinate ❤
Please hop through the blogs and be inspired by the work of the talented Inspiration and Educator teams! Leave a comment for each designer and you could win a Folio Journal die (as soon as it arrives!)
Join me and specials guests for a Facebook Live on Wednesday, Feb. 3 at noon Eastern. Comment on our Facebook Live and be eligible to win either the Mandela die or the Folio Pages, Pockets and Flowers die- two winners! 
Winners will be announced on the Facebook Live show on February 9 at 6:00 EST. 
We appreciate your love and support, friends!

Wednesday, September 30, 2020

NEW Die Release for Eileen Hull

Two new ScoreBoard dies are released from Eileen Hull! They include a new 3D Bigz L Tea Cup that can be filled with any assortment of treats and more for a variety of occasions. The cup shape, along with the spoon and little label, holds many possibilities. Also there is the XL Post Box die! Another box shape that goes together quickly with a slit to slip in something special! 




To showcase the newest Eileen Hull dies for Sizzix, I've chosen to feature them using my very favorite holiday movie as the theme - "It's a Wonderful Life", and that famous line from the movie ... "teacher says, anytime a bell rings, an angel gets its wings".

The shape of the teacup is perfect for a bell and the spoon as the bell clapper, plus as a base for and angel. The addition of the mailbox die as the second release, just made me want to find a way to configure the box into a little boxed book. 

Here are the finished projects...

Silver Bell Ornament from Tea Cup Die

                                            

Angel Ornament from Spoon Die

Here is a list of those who are taking part in the  Bloy Hop to showcase ideas using these newest Sizzix dies by Eileen Hull. Just click and check them out and get some inspiration!

Tonya Trantham

Elizabeth Robinson

Julia Aston

Pam Bray

Maggi Harding

Lisa Hoel

Anna-Karin Evaldsson

Karen Bearse

Susie Bentz

Jenny Marples

Mitsyana Wright

Jennie Atkinson

Anita Houston

Madeline Arendt   This is ME!

Sarah Lizzie Dodd

Sue Eldred

Debbie Bankston

THERE IS A GIVEAWAY!  Leave a comment on the Facebook Live Release Party post, to be entered to win the new Teacup die. Comment on the Blog Hop under each designer, to be entered to win the Post Box die.  Random winners will be picked and announced on October 6, Tuesday's Facebook Live. 

Tuesday, June 30, 2020

Christmas In July - New Die Release

A MESSAGE FROM EILEEN HULL:

Thanks for coming to the Eileen Hull/Sizzix Chapter 3 Release Party Blog Hop! Check out the creative ways the Inspiration and Education Teams have used the Mitten and Snowman dies! We hope that you will be inspired too and share how you use the dies in the Eileen Hull Fan Club.

But wait, there’s more - the Release Party continues! You won’t want to miss the Facebook Live at Eileen Hull Designs at 12:00 noon Eastern time on Wednesday, July 1! Join the chat- and a random commenter will win the Snowman die. We are so glad you joined us to celebrate the Chapter 3 release.

Please hop with us through all of the projects and leave comments on the different designers' blogs. A lucky commenter will win the Mitten Box die…



Never too early to begin thinking ahead to Christmas!  New dies being released conjure up inspiration and new ideas.  Eileen Hull has added two steel rule dies with a Winter theme. Here are my first attempts using these new designs.


Mitten Book

This little book combines all the piece from the die to create a little book with an accordion style spine to hold pages and easy embellishments. It uses a cotton fabric added to the covers. Fabric can be added to the mat board using various forms of adhesives. Coming from a sewing background, with the desire to experiment with a variety of products, I’ll be using an iron on fusible for the mitten covers. It’s something you may not have tried or thought of but it does work! I will share tips.


  • Cover both sides of mat board with fabric using fusible adhesive. Use a piece of mat board large enough to cut two mitten shapes. 
  • From solid color card stock, cut mitten shapes for pages.
  • Cover a piece of mat board for the box shape with decorative paper on both side, then cut one shape. Remove/cut away the two small side flaps. 


  • Cut a rectangle pieces from card stock for the accordion folded spine, measuring 2” x 6” approximately. Using a scoring board and tool, make score lines 3/8" apart, along the strip of paper. Accordion fold the piece. (Diagrams for folding and gluing below. The finished folded spine was trimmed to the length of 5 1/8" long.)



  • If adding pockets for tags on the pages, apply them before assembling the book. (The credit card cut was folded under to make a shorter pocket for the tag -2 1/4".)


  • Cut and place of double-sided tape to one mountain fold on spine to attach the pages.
  • Cut 2 pieces of flat braid for the ties, 12"-13". Glue the braid from bottom edge of mitten piece, down the center to top of mitten piece. Repeat for other cover. 


  • Glue the paper covered base to the inner covers of each mitten piece. Aligning the bottom edge of mitten with the folds of the base piece. Hold in place with binder clips till glue dries. 


  • Attach each page onto the folded spine .
  • Color the hearts and zig-zag shapes; glue to embellish the front and bach covers. (NOTE: The shapes were coated with Glossy Accents.)

TIPS:  To use iron-on fusible it's best to follow instructions on product. DO NOT use steam (it can warp the mat board). Lay the fusible onto the backside of the fabric; press to adhere. Remove the backing sheet and place onto the mat board, then press with iron to adhere. Die-cut the shapes, if any edges lift, re-press with iron.
NOTE: I would be happy to answer further questions about the project and materials if requested. 

Materials

New Eileen Hull Sizzix Die, Box, Mittens
Eileen Hull Sizzix Die, Credit Card Sleeve & Tags 662810
Mat board
Cotton fabric
Fusible adhesive (I use Thermoweb Heat n Bond Ultra Hold)
Decorative paper for box base, pockets
Card stock, pages
Card stock, accordion fold spine, tags
Scoring board, scoring tool
Adhesive tape
Flat braid, ties, 24”
Ribbon
Inks or paints
Glue
Paint brush
Ranger Glossy Accents 
Binder clips


Snowman Cards




The cuts from the new Snowman Box die are used here to create the two cards. The same idea could be used on a canvas board for display. Again a variety of materials can be used for cutting any of the pieces on this steel-rule die. Some suggestions are to use fabric for the background, hats or scarves. Use felt or batting for the snowman or snow cloud. 

  • Cut or tear paper or fabric for card background. Attach the background by sewing or gluing onto card front.
  • Apply modeling paste onto the snow cloud piece using a brush or pallet knife. Set aside to dry.
  • Paint the snowman piece with a shimmery, metallic white acrylic paint. Set aside to dry.
  • Paint twig arms, carrot nose, coal eyes and top hat (or any of the other pieces) appropriate colors. (NOTE: All the extra pieces could also be cut from papers or other materials.)
  • Apply washi tape to stocking cap, scarves and top hat band.
  • Arrange and glue all the pieces onto front of cards as desired or shown. 
  • Add a pom-pom to stocking cap; green sprig and red berry to hat.
  • Punched snowflakes and evergreen springs are added for extra background embellishments. 
Materials

New Eileen Hull Die - Box, Snowman
Paint, TCW Shimmery Goodness
TCW Light & Fluffy Modeling Paste
Blends inks, Nutmeg, Ebony
Orange paint
Washi tapes
Decorative background papers
Green, white paper scraps
Punches, snowflakes, greens
Glue
Pom Pom
Paint brush

This is a group blog hop to promote Eileen's latest dies. 

Here is the list of participants to use too!  Just another way to visit each of the  individual blogs.

Wednesday, March 30, 2016

ETI Resin Project For New Bathroom

This post will show the project that was created for a bathroom edition in my basement near my workroom.  It was a much-needed addition to the workspace.  The purpose of the room was mostly for a source for water and clean up space. When planning this room I knew that I wanted to use resin from ETI somehow.


I knew that I wanted something different but functional.  At first, I wanted something like an old farm sink but that just wasn't in my budget.  After searching for sinks online I came across the rectangular vessel sink.  Faucets were my next concern and I wanted an old-fashioned look and found just the right ones.  The next thing to create was a unique base to capture the look I wanted.  The best place to look for something unique was our area, Flea Market.  At first, I was looking for old planks of wood but then I found some old barn doors and chose one to use.

All the old, original hardware was removed first.  After deciding on the size needed for the vanity top, some of the boards were removed to get the correct width for the top.  Next, the remaining piece was cut to the correct length of the top.  A piece of particle board was cut to fit under the barn door for added support.  It was attached to the base before the process of adding the resin began.

I have worked with ETI resin in smaller projects but this was my first attempt to do something so large.  It was a learning experience for sure! I did make a few errors in prepping for the project. To cover the door to the thickness I wanted, I had to do several pours of the resin.

Close-up of the first pour to fill the grooves between boards
Once the top was completed, it was decided where the sink would be placed and a hole for the drain was drilled through the layers.


Two of the pieces that were removed from the door were used as the backsplash along the back and right side of the vanity.  To coat these with the resin I elevated them with  small cans on a plastic covered table and prepared the resin.  Using a utility, bristle brush the resin was just brushed onto the boards.  Two coats of the resin were added to the boards.  They were then attached to the wall to finish the vanity top.

I love the results!  The resin brought out all the interesting imperfections of the wood to give the top its very unique look.

Now go to the other designers blogs and see what they have come up with using ETI products!

Ann Butler Designs – ETI Blog Hop March 31, 2016













Friday, November 14, 2014

"Upcycled Jewelry" by Linda Peterson Book Review Blog Hop

Designer/Author, Linda Peterson has a new book titled "Upcycled Jewelry - Bags, Belts & More" that I have been lucky enough to been given a copy to review for this blog hop.  You can find Linda's website at this link.  She will be hosting a "giveaway" along with this blog hop.


Being a "creative soul" along with a believer in reusing found and recyclable items for pieces that I create, I was delighted in reviewing this book and absorbing the ideas that Linda has to share.  The book contains 35 projects using everyday materials and some interesting additons to create very usable and modern designed accessories.

The jewelry pieces, whether made using plastic pieces, aluminum cans, bottle caps, zippers, soda can tabs, to just name some elements used, are all such clever ideas and could be followed exactly from her book or given your own twist.  The photos for the projects are great for the "visual" crafter.  Each project has a "Helpful Hint" that I like with instructions.

There are many designs in the book that I would enjoy recreating.  What I enjoy most are the "outside the box" materials, like the bicycle chain, the plastic bags and the ideas using an inner tube.  The "loop de loop ring" and the "retro studded cuff" and the "ring o' roses necklace come to mind.

After reviewing Linda's book, I attacked my boxes of saved materials and finds.   After taking a look through  my collection of things I created a pendant and pin.  The base of both are constructed from an old vinyl eye glass case.   Additional heart shapes are from pieces of old sunken wool sweaters.  Other elements used to finish them are old rusted keys, a decorative zipper pull from an old sweater, chain necklace from old costume jewelry. the lens from old eyeglasses, a saved image from an old postcard,  and a copy of a found verse.


Here are some links you can check out to find out more about Linda:

Linda's Blog: http://lindapetersondesigns.com
You Tube Playlist of Upcycled Jewelry: http://lindapetersondesigns.com
Amazon Site for Book Reviews: http://www.amazon.com/Upcycled-Jewelry-Bags-Belts-More/dp/1782491511/ref=sr_1_4?ie=UTF8&qid=1414079726&sr=8-4&keywords=linda+peterson+books

There are several others who are particpating in the blog hop and you should really take the time to check them out and see what others are saying about Linda's latest book.