Christmas In July Continues - A Banner Season

Continuing with another "Christmas in July" idea using the new snowman die from Eileen Hull to create this banner for holiday decorating.

Most dies are made to be used with paper only but I have a thing with always stretching my ideas to see just where I can take them.  For some reason most projects that I make it's difficult to not mix things up. Sometimes that means spending time experimenting first with the wide variety of materials that are available.  This project features one of the the new Eileen Hull chapter 3 dies used in a different direction, follow along with the steps given, for something new to give away or add to your holiday or seasonal decor.

Materials
Eileen Hull Sizzix die, Snowman
Snowflake die
Alphabet die
White felt
Thermoweb Ultra fusible iron-on adhesive
Foam adhesive sheet
Fabric scrap
Black heavyweight paper
Brown heavyweight paper
Orange card stock
White decorative paper
Metallic foil
Cording or ribbon
Ultra bond adhesive
Thin raffia
Red bead or tiny Pom-Pom
White pen

NOTES & TIPS:
White felt is layered together to make the snowman bodies. Decorative fabric is also layered together for the scarves. Instructions will be given on the process of using a fusible adhesive with both types of fabrics.  *** Follow the instructions that come with the fusible adhesive for heat settings and process. Tips will be given here to help with the process. Most iron-on fusible come with a paper backing on one side.

Glue together 2 layers of the black and brown papers before die-cutting them for the top hat and branch arms.  Use heavyweight paper on hand and paint them to the color desired.

Preparing felt and fabric before die-cutting shapes

The dies used for the snowflakes and letters are older dies that are no longer available but there are some newer designs available.  Substitute another element for the snowflake and another style of alphabet.


Fabric Prep

• Cut 2 pieces of felt large enough for the nine snowmen shapes and a piece of fusible adhesive to match. 
• Press the felt if needed before layering.
• Place the fusible down onto one piece of the felt with the paper backing facing up. Place iron onto the paper side of fusible. The best method is to press the iron down and hold for several seconds before moving the iron to another area. Once the entire piece is pressed down in this fashion, the iron can be slide back and forth over the fusible. Allow it to cool down.  Remove the paper backing from the fusible. TIP: If fusible was not heat set enough it may remain attached to the paper backing. Repeat that area again; cool and release.

• Place the second felt piece over the fused adhesive. Press as before till both pieces are fused together. NOTE: Depending on the thickness of material used it may take a little longer to adhere the layers. Once shapes are die-cut and any edges are not completely fused, repress those edges carefully. 

• The same process can be used for fusing thinner fabrics together (snowmen scarves). 

 Assembling snowmen for the banner

• Die-cut ALL pieces from desired materials.
• Lay out all the pieces needed for each snowman before gluing into place. 

• Decorate black hats by gluing a strip of raffia around the hat (Refer to photo for placement). Allow glue to dry then add a piece of punched sprig and a red bead to finish the hats. 
• Add all pieces by gluing onto the snowman shapes. Start  by placing the hats on first in whatever fashion desired. Next add the scarves. Add the eyes and nose, finish with the two branch arms. Set the snowmen aside till all pieces dry.  
• Cut a piece of a foam adhesive sheet for die cutting the letters used to spell out - let it snow.  Remove one of the backing sheets from the foam. Place a foil sheet over the foam adhesive and press onto the adhesive we’ll.  Remove the clear foil sheet cover.  Die-cut the letters from the foam without removing the other release paper.  
• Prepare another piece of foam adhesive sheet with for the snowflake spacers using the white decorative paper. Die-cut 4 snowflakes from the covered foam and 4 from paper only.
• Place the foil/foam letters onto the snowman near the bottom (Refer to photo).
• With white pen, add a small dot to each eye.

Stringing Banner

• Lay the snowman out in-line, facing up to arrange. Note: Notice that they are each close enough to have it appear they are holding hands. The snowflakes act as spacers between each group of snowmen and those next to them appear to be touching the snowflakes. 
• Carefully turn them over, keeping them spaced.
• Run a bead of glue along the neck area to hold the cord. (Refer to photo). Note: If desired a small paper punched circle or square could be glued over the area where the cord runs along the back of each snowman for extra hold. 

• Remove the paper backing from the snowflakes and line them up at each end and between the groups as shown in the photo.  Align the other paper snowflakes over the snowflakes with adhesive. 

NOTE: If you are in need of further instruction or clarification, feel free to ask. If you follow me on Facebook or are a member of Eileen Hull's Fan Club, you can ask a question there.  Until I can resolve a problem replying on by blog, I may not be able to quickly answer any concerns. 

Christmas In July - New Die Release

A MESSAGE FROM EILEEN HULL:

Thanks for coming to the Eileen Hull/Sizzix Chapter 3 Release Party Blog Hop! Check out the creative ways the Inspiration and Education Teams have used the Mitten and Snowman dies! We hope that you will be inspired too and share how you use the dies in the Eileen Hull Fan Club.

But wait, there’s more - the Release Party continues! You won’t want to miss the Facebook Live at Eileen Hull Designs at 12:00 noon Eastern time on Wednesday, July 1! Join the chat- and a random commenter will win the Snowman die. We are so glad you joined us to celebrate the Chapter 3 release.

Please hop with us through all of the projects and leave comments on the different designers' blogs. A lucky commenter will win the Mitten Box die…

Never too early to begin thinking ahead to Christmas!  New dies being released conjure up inspiration and new ideas.  Eileen Hull has added two steel rule dies with a Winter theme. Here are my first attempts using these new designs.

Mitten Book

This little book combines all the piece from the die to create a little book with an accordion style spine to hold pages and easy embellishments. It uses a cotton fabric added to the covers. Fabric can be added to the mat board using various forms of adhesives. Coming from a sewing background, with the desire to experiment with a variety of products, I’ll be using an iron on fusible for the mitten covers. It’s something you may not have tried or thought of but it does work! I will share tips.

• Cover both sides of mat board with fabric using fusible adhesive. Use a piece of mat board large enough to cut two mitten shapes. 
• From solid color card stock, cut mitten shapes for pages.
• Cover a piece of mat board for the box shape with decorative paper on both side, then cut one shape. Remove/cut away the two small side flaps. 
• 
  
  
  
  
• Cut a rectangle pieces from card stock for the accordion folded spine, measuring 2” x 6” approximately. Using a scoring board and tool, make score lines 3/8" apart, along the strip of paper. Accordion fold the piece. (Diagrams for folding and gluing below. The finished folded spine was trimmed to the length of 5 1/8" long.)
• 
  
• 
  
  
  
  
  
• If adding pockets for tags on the pages, apply them before assembling the book. (The credit card cut was folded under to make a shorter pocket for the tag -2 1/4".)
• 
  
• 
  
  
• Cut and place of double-sided tape to one mountain fold on spine to attach the pages.
• Cut 2 pieces of flat braid for the ties, 12"-13". Glue the braid from bottom edge of mitten piece, down the center to top of mitten piece. Repeat for other cover. 
• 
  
• 
  
  
• Glue the paper covered base to the inner covers of each mitten piece. Aligning the bottom edge of mitten with the folds of the base piece. Hold in place with binder clips till glue dries. 
• 
  
  
  
  
• Attach each page onto the folded spine .
• Color the hearts and zig-zag shapes; glue to embellish the front and bach covers. (NOTE: The shapes were coated with Glossy Accents.)

TIPS:  To use iron-on fusible it's best to follow instructions on product. DO NOT use steam (it can warp the mat board). Lay the fusible onto the backside of the fabric; press to adhere. Remove the backing sheet and place onto the mat board, then press with iron to adhere. Die-cut the shapes, if any edges lift, re-press with iron.

NOTE: I would be happy to answer further questions about the project and materials if requested. 

Materials

New Eileen Hull Sizzix Die, Box, Mittens
Eileen Hull Sizzix Die, Credit Card Sleeve & Tags 662810
Mat board
Cotton fabric
Fusible adhesive (I use Thermoweb Heat n Bond Ultra Hold)
Decorative paper for box base, pockets
Card stock, pages
Card stock, accordion fold spine, tags
Scoring board, scoring tool
Adhesive tape
Flat braid, ties, 24”
Ribbon
Inks or paints
Glue
Paint brush
Ranger Glossy Accents 

Binder clips


Snowman Cards

The cuts from the new Snowman Box die are used here to create the two cards. The same idea could be used on a canvas board for display. Again a variety of materials can be used for cutting any of the pieces on this steel-rule die. Some suggestions are to use fabric for the background, hats or scarves. Use felt or batting for the snowman or snow cloud. 

• Cut or tear paper or fabric for card background. Attach the background by sewing or gluing onto card front.
• Apply modeling paste onto the snow cloud piece using a brush or pallet knife. Set aside to dry.
• Paint the snowman piece with a shimmery, metallic white acrylic paint. Set aside to dry.
• Paint twig arms, carrot nose, coal eyes and top hat (or any of the other pieces) appropriate colors. (NOTE: All the extra pieces could also be cut from papers or other materials.)
• Apply washi tape to stocking cap, scarves and top hat band.
• Arrange and glue all the pieces onto front of cards as desired or shown. 
• Add a pom-pom to stocking cap; green sprig and red berry to hat.
• Punched snowflakes and evergreen springs are added for extra background embellishments. 

Materials

New Eileen Hull Die - Box, Snowman
Paint, TCW Shimmery Goodness
TCW Light & Fluffy Modeling Paste
Blends inks, Nutmeg, Ebony
Orange paint
Washi tapes
Decorative background papers
Green, white paper scraps
Punches, snowflakes, greens
Glue
Pom Pom
Paint brush

This is a group blog hop to promote Eileen's latest dies. 

http://www.eileenhull.com/2020/07/christmas-in-july-new-dies-released-a-hop.html

Here is the list of participants to use too!  Just another way to visit each of the  individual blogs.

Madeline Arendt

Julia Aston

Jennie Atkinson

Debbie Bankston

Karen Bearse

Susie Bentz

Pam Bray

Sue Eldred

Anna-Karin Evaldsson

Annette Green

Maggi Harding

Lisa Hoel

Anita Houston

Sarah Lizzie

Jenny Marples

Elizabeth Robinson

Tonya Trantham

Cheryl Waters

Mitsyana Wright

Nicole Wright

A Favorite Thing

A favorite thing is using what I have and what I LOVE!  For me, that also happens to be the fun and the challenge that comes when creating with my favorite tools and materials and mixing it all up with ideas into something worth sharing.

A project from the past begins with a versatile surface to create from,  Eileen Hull Sizzix die, the Journal.  (One of the main reasons her dies have become my "go to Tools".)


 Mixed Media Journal

Let's begin...
To make this journal I used a Sizzix die designed by Eileen Hull and the Big Shot die cutting system that I like to use for most of my die-cutting.  I have added the material list that I used to complete this project.  NOTE: Use what you have available or other perferred materials.

Front Journal Cover

This cover was made using two different techniques from the book together for a layered look that still showed under the other embellishments.

Back Journal Cover

The back journal cover again uses a easy and fun background technique that will change with colors used, tools (such as stencils or stamps) and type of medium (paints and/or inks).

Front Journal Label

Another fun and interesting technique using foils that creates a lovely background, whether it is large or small.

Inside Journal Signature Covers

Transform double-sided card stock into something different using techniques found in the book along with a variety of stamps, stencils and various paints and other mediums.

Art Tape for Embellishments

Art Tape Foiling

Add coloring with inks or paints and then add stamped images to create "one of a kind" backgrounds for embellishments.  Add foil to the adhesive side for an intereesting affect.

To complete the journal a burlap ribbon band is added for texture, along with die-cut leaves from coordinating card stock.  The leaves have touches of various colored foils added to them before gluing in place.  A small bow was created from the Art Tape. The word "journal" is cut from fun foam.  The last element is an old jewelrey find.  Signature covers are made from the re-designed card stock, with inserts for each are  made by using copy paper.

NOTE: Techniques used to create this Journal can be found here: 
 ebook by Rebekah Meier's Paper Art Collage

List of Materials
Sizzix Dies:Eileen Hull Journal die
Sizzix Dies: Eileen Hull Journaling Words
Sizzix nesting label die
Tim Holtz thinlits bows, skeleton leaves, funky festive
Sizzix Big Shot cutting machine

Mixed Media adhesive sheets
Mixed Media art paper sheets
Mixed Media art tape
Mixed Media foil sheets - patina, antique pearl, old gold
Mixed Media medium
Double sided tape, 1/4”
TCW gold gesso, light & fluffy modeling paste
TCW stencils by RM 462, 462S, 768
Stamps RM mesh, mandala, Death Star explosion
Stamps RM F22011,G22006, F22003, F22000, H22014, H22012, L22013, CC18

Paints - DecoArt media fluid acrylics, assorted colors
Distress oxide inks, assorted colors
Mat board, 2 -  6" x 13"
Gelli arts plate
Brayer
Decorative papers, assorted
Assorted papers, Various weights and colors Black foam
Seam binding, white Various embellishments

Faux Tiles with Creative Art Textures

Create "faux tiles" with two colors of paint and papers, a gel plate and Creative Art Textures designs by Rebekah Meier.

Black Box & Black Book

The projects of this box and book were made to show how to print with the Creative Texture Plate and a gel printing plate. A single Creative Art Texture design and single colors was used for each project; Black on white, white on black.  A print was made for the 6 sides of the box and book covers, inside and out.  To give the printed pieces the look of glazed tiles, each print was embossed with clear embossing powder. 

The little black book is made from one die cut box design fits inside the finished gift box.  

NOTE: Beside the written instructions, there is a short video of approximately 4 minutes that covers the the printing on the gel plate, trimming the printed designs to fit the sides of the box, the process of embossing each design and adding the embossed squares to the box.  In the written instructions the Creative Art Textures will be referred to as CAT.

Material List

Creative texture stamps

Gel printing plate 

Acrylic paint - white, black

Brayer 

Printing paper

Sizzix Big Shot

Sizzix Die

Mat board - 3 sheets

Adhesive (sheet or spray)

Clear acrylic ruler

Paper cutter or rotary cutter

Clear embossing pad

Clear embossing powder

Heat tool

Extra Materials 

Scissors

Ribbon bias tape

Piercing tool

Scoreboard and tool

Paper for book spine and pages

Extra Materials

Black paint

Brush

Glue

Extender/paint

Optional: Mod Podge, glossy finish

Instructions

Printing the tile designs (Make 6 for the Box, Make 4 for the book)

1. Apply paint onto a surface (I used another gel plate). Use a brayer to spread the paint onto the gel plate used for printing with the Creative Art Texture.  
2. Remove the CAT from the plate and apply the paper square and make the print.  Repeat for each paper square. Repeat the process with both black and white paint.

 NOTE: The short video shows a small part of this process, found at the end of the post

Measure - Trim Printed Design Tiles

1. Using an acrylic ruler, find the center of the printed design image on each printed sheet, in both  directions and mark.
2. Trim all four sides with a rotary cutter and ruler to fit the measurements of the sides of the box. 

NOTE: The short video shows a small part of this process, found at the end of the post.

Embossing the Paper Design Tiles

1. Press the paper tile into clear embossing ink.
2. Sprinkle with clear embossing powder
3. With heat tool, melt the powder to coat the paper.
4. Repeat these steps 2 to 3 times to build the coating to look like a glazed tile. Repeat these steps for each paper tile.

NOTE: If using Mod Podge, glossy finish, use several coats of glossy Mod Podge to get a similar look. Allow time between coats to dry well. 

Making Box

1. Cut box from mat board (Two pieces will be needed for box, one for book).
2. If using white mat board, paint the pieces with black matte paint. Crease at folds and paint the edges. Dry.
3. Construct the box using glue or strong adhesive tape.
4. Add double-sided adhesive sheets, cut to fit each paper tile square.
5. Apply each square to a side of the box.

NOTE: Optional, a ribbon closure was made by using 4 lengths of ribbon. Poke a hole into the center of the bottom of the box. Thread the end of the 4 lengths through the hole, from the inside.  Knot the four lengths together (make the knot big enough so it will not pull through).  Draw up each piece of ribbon on each side the tie into a bow at the top.

Making Book

1. Cut one mat board with die once.
2. Measure and cut at the center of the middle square of the die-cut.
3. Paint with black matte paint if needed. Paint all edges and creases. Dry.
4. Glue the two cut pieces to form book. Use glue or strong adhesive tape. 
5. Cut a piece of black paper for center of the inside book to hold pages. Measurement is approximately - 6 1/2” x 3 3/4” (No wider)
6. Using a scoring board and bone folder, make lines for folds 1/2” apart along paper strip. Form an accordion folded inside binding for paper pages.  NOTE: Fold paper piece in half (this becomes the first mountain fold). Make 2 score lines from the center, both sides, each 1” apart. Turn piece over and make 1/2” score lines between the 1” spaces. The 2 ends will be a bit wider than 1/2”.
7. Glue the first and last 1/2” fold onto the inner edges of the front and back covers. 
8. Apply the finished paper tiles, same as the directions above for the box, to outside and inside of the covers.
9. Cut paper pages of choice to fit the book, gluing onto the accordion folds of the inside binding.

NOTE: Optional, add ribbons for a closure, glued into,place before adding front and back tiles. 

Video Link:

Mixing It Up With Eileen Hull‘s NEW Pocket Notebook

Come join the party and see the creative ideas for Eileen's Pocket Notebook

Welcome to the Pocket Notebook Release Party! This is Eileen Hull’s newest book die with Sizzix. On the die, you get all of the pieces you need to make an entire book- the cover, pages, latch and pen loop! The Pocket Notebook measures 6 3/4” x 4 1/2” with a spine that can adjust from of 3/8” to almost 2”! String it with elastic, hemp, ribbon or twine. So many option for this fun die!

Eileen’s Inspiration and Educator teams have combined to show us their amazing Pocket Notebook ideas. Please follow the Blog Hop to see all of the fabulous projects, techniques and videos! 

There are also two GIVEAWAYS- the Pocket Notebook die and a gift certificate for Eileen’s Etsy store. To enter to win, leave a comment on each of the posts. Winners will be announced on Tuesday, October 8 on Eileen’s Facebook Live show.

Thanks for hopping along with us today!

Eileen Hull (you are here)

Susie Bentz

Pam Bray

Julia Aston

Annette Green

Kathy Clement

Cheryl Waters

Ginger Ropp

Mitsyana Wright

Debbie Bankston

Anita Houston

Maggi Harding

Anne Redfern

Jenny Marples

Betsy Skagen

Anna-Karin Evaldsson

Tonya Trantham

Madeline ArendtI|(This is ME)

Lisa Hoel

Karen Bearse

Sue Eldred

Elizabeth Robinson

Metal & Stencil Mix-Up

Having the opportunity to create with this newest Eileen Hull’s Sizzix die was fun! This is another one of those dies that keeps my mind busy with ideas.  This is a nice size for a book for any variety of uses.

My goal was to share ideas of using different materials and applications to incorporate with this die.  This caused me to take my favorite stencils, simple techniques of inking and the fun of working with metal embossing, then combining them all together.  Working with these Scoreboard dies and mat board makes for a wonderful surface for so many applications.

Before assembling

The marvelous products available for crafting today help with creating successful projects. When making books, journals or albums with mat board and dies, I like to use sheet adhesives like those from Thermoweb.  Using a product such as this allows the application of a wide variety of materials.  I love using papers but my favorite is fabric.  This project included some scraps of collected fabrics for the covers.

Preparing fabric for cover:

To design the fabric for book cover, place stencil onto the fabric.  Ink sponge and apply ink(s) over the stencil.  Don’t worry about complete coverage, randomly applications gives the fabric a faux batik look.  Move stencil around on the fabric repeating with the ink(s) until desired coverage.
NOTE: If wanting a different effect on the front cover, use the Art Sheet. Repeat the process used o for the fabric on the surface of the Mixed Media Art Sheet also.

Back outside cover

Back inside cover

For the inside front cover, a piece of the fabric was used.  It has the stencil design traced on it with a fine point permanent black pen first, then inked over the stencil pattern with a dark ink, before finishing with a stamped design .

Front inside cover

Apply all the designed fabic pieces and Art sheet to pieces of mat board and then cut covers pieces.

Assemble the pocket notebook as directions suggest with the adhesive of choice.  String the binding with elastic cord.

Signatures and Pages:

To make the pages for the notebook, I choose to use various packing papers I had saved.  I removed creases by ironing the sheets flat and stacking and cutting them to size.  

The signature folders were made using two different card stocks.  One has a solid yellow front with white back, the other a simple brown herringbone pattern on one side and white back.  I then used stencils and inks to add colors and designs on both sides of the papers and finished with stamped designs. The finished sheets are cut to fit the notebook and paper pages, then inserted.

NOTE:  A nice finish to the signatures and pages is to punch all four corners with a rounder punch before inserting. It also helps the process of placing and removing them from the notebook. 

Finishing Pocket Notebook:

Carefully punch four holes through the corners of the metal embossed pieces and front cover.  Put in place and hold with four paper brads.  If desired, place a few pieces of double faced tape to the backside of the metal before putting in place. A old rusty key was attached for a closure, along with a length of silk ribbon.

On the outside spine a piece of foiled adhesive was added. Hand dyed bias tape was laced through the elastic binging and tied together, then finished with some decorative beads. Any other added embellishments and be place on pages or signatures for added decoration.

Embossed Metal Cover:

Begin with a piece of aluminum metal slightly larger then then cover.  Place the metal onto a sheet of suede or foam pad the help with the embossing of the design.  Tape the stencil onto the center of the metal piece. Begin tracing with a stylus the pattern from the stencil.  There’s no need to trace every line. NOTE: If you do not have embossing tools, use a black ballpoint pen and and the round d end of paint brushed for forming indented circles.  For help with the process of metal embossing refer to either a book or videos online. Also, there are many videos online available with tutorials on every level of metal embossing. No need for expensive materials to start out with. Several books are available for purchase or possibly found at a local library. I was lucky enough to participate in a workshop with Magdalena Muldoon, the author of Metal Embossing Workshop. 

MATERIALS

Sizzix Big Shot machine
Eileen Hull #663638 Scoreboard XL Pocket Notebook
Mat board
Thermoweb adhesive sheets
Thermoweb Mixed Media Art sheets by Rebekah Meier
The Crafters Workshop, Rebekah Meier stencils,  Rosetta 461S
Lightweight, solid cotton fabric
Inks, assorted colors
Embossing metal
Metal embossing tools
Paper brads, 4
Elastic cord
Seam binding, white-dyeable
Dark brown acrylic paint
Cosmetic sponges

Extras:
Card stock, assorted plain or patterned
Distress Oxide pads or sprays,  coordinating colors
The Crafters Workshop stencils, Rebekah Meier 699S, 462S, 775S
Stamps, Impression Obsession, French document, NPC
Paper Trimmer
Metallic foils
Ribbon
Closure, old key
Beads
Any extra embellishments
Paper for signatures