Arnold Grummer's Papermaking - Creating Shapes with Paper Pulp

Spring finally seems to showing itself here in our area.  Along with signs of the season popping and blossoming here and there, the robin's and other feathered friends are singing and building their nests for more new life.

Many will be celebrating Easter next Sunday.  My little family will be gathering here to celebrate both the holiday and the five Spring birthday's we have within one month.

While working on making seed papers for my last post I also had the idea to make paper pulp and work with casting shapes with other forms that I have within my supplies.  I found an egg shaped mold that was used to make chocolate or sugar shaped eggs.  I had to try to use this mold to form a large egg shape using paper pulp.

I wanted to experiment with the pulp and find a way to make the shape stiffer.  I feel my experiment was succesful.  After making several batches of pulp I strained as much of the water out as possible.I placed the entire  amount into a bowl and added approximately 1/4 cup of Stiffen Stuff by Beacon Adhesive and mixed it into the pulp.  By hand, I began to pat the pulp into the egg mold bringing the pulp up over the top edge slightly and then repeated the process with the other half of the mold.  I used small pieces of sponges to try to remove as much of the moisture from the pulp as possible.  To help the drying process along, I placed the molds into the microwave and set it at short intervals of 40 seconds several times, beginning at 50% power and working to 100% power for 30 seconds.  After this process the shapes were left to dry completely overnight.  Once dry, the shapes were carefully removed from the molds.  To make the shapes stronger, I brushed several light coats of Stiffen Stuff onto the shapes.  NOTE:  I did several coats on the outside of each form, allowing them to completely dry between coats then repeated the same process on the inside.

From one half of the egg shape I created a candy holder.  The outside was painted with white pearl acrylic paint finish and the inside was painted with a yellow glitter paint.  A handle was fashioned from a strip of handmade paper.  NOTE:  To stiffen the handle, Stiffen Stuff was brushed onto the strip following the same process mentioned above.  A length of decorative ribbon was glued to the handle.  Two paper brads are used to attach the handle to the base.  Fill with "grass" and your favorite candy.

The second half was finished to hold a little chick and some paper flowers for a sweet Spring decoration.  This half was painted with white paint and the covered with glue and sprinkled with white glitter to give it the look of sugar coating.   In the bottom of the egg Icut a piece of styrafoam and glued it to the inside.  Folded green rice paper was cut into thing strips to create paper grass.  Paper punched flowers with leaves were created with a piece of wire placed between to flower punch shapes and placed into the foam.

This project will more then likely lead to more experiments with using pulp to form three-dimensional shapes in the future.

Visit the Arnold Grummer website and when placing an order for product use the code MOM20 this month to receive 20% off your order.

Arnold Grummer's Papermaking - Just a Little Bit of Luck

Hearts shapes are so last month, with March just a few days away it time to think of "Shamrocks" and GREEN.

From the last post I wrote, I mentioned how I was playing around with paper pulp.  After making several sheets of handmade paper to be used in cards for embellishments, I decided to use paper pulp to form thicker shapes and thicker pieces of paper to be used for other projects.

The idea of making thick shapes and paper sheets was to show how hamdmade paper pieces like these can be used several other ways.  The texture of handmade paper and shapes adds to any element you can make.

After forming a thick shamrock shape, with a cookie cutter as a deckle, it became a perfect base for a necklace.  It was colored using thinned acryrlic paints of various green hues.  It was applied by tapping the colors onto the surface using a brush or sponge applicator.  NOTE: Do not use too much water in this process. Allow the piece to dry between applications as not to saturate the paper too much.  When the coloring is to your liking, allow the piece to dry very well and it will become very firm once again.

Punch a small hole near the top where desired and add a eyelet. Add a large jump ring for the necklace. I used two different size and colors of crystals to apply to the shape.  Using a thin beading wire, transfer each set of crystals onto length of wire.  Begin wrapping the crystals around the shape, keeping the crystals only on the front of the surface.  NOTE: I began with the smaller sized crystals on the bottom and overlapping the larger ones on top.  I left a small length of wire on the back side from each strand of beading wire to twist and connect the two to hold them in place.

At the bottom of the shamrock a small hole was made with a piercing tool and a wishbone charm on a jump ring was added.

Three different strands cord or ribbon became the necklace.  Cut the same length from a jute cording, and two different ribbons.  Find the middle and lace through the large jump ring.  Each side was braided and then knotted to from the necklace.

After finishing the necklace I thought why not add something else.  So a pair of earrings were created, again with only papers.  To make the base discs and the small shamrocks, I used scraps of other handmade papers that were left from the previous projects.  Punch two round circles for each earring from the paper, punch three flower shapes for each earring from the paper.  NOTE: It may be helpful to place the paper to be punched between two pieces of waxed paper.  This aids in the process of punching the handmade papers.   I trimmed one of the flower petals with small scissors to form the stem of the shamrock.  The flower shapes are glued together to give them a little more stability.  NOTE: As each is glued, I trimmed it to make the stem.  The finished shamrocks are colored using the same process as above. 

 I created two discs for the background using handmade paper scraps also.  I made them to look similar to the metal discs that could have been used.  This was done to show how paper can replicate other mediums.  Again, I glued two layers of the punched circles together for each earring.  Two more circles were punched from a gold cardstock I had on hand for the backside.  NOTE:  Three layers of the paper circles would work fine too.  This was just a preference.   These circles are glued to  the others with the gold facing out.  The front surface was colored with a bronze paint and when dry, I inked over the discs with Vintage Photo and Walnut Stain Distress Inks.  The results looked very similar to the copper metal discs.  Pierce a hole into the top of each disc for a jump ring and attach.  Add a smaller ring to the earring wire, then attach to the the earring disc.  I coated the discs with Ranger  Glossy Enamel to give them a resin look.

These ideas that I have shared so far are created to show the various ways handmade paper can be used.  It is a fun process to create your own papers or castings.  Paper can be used for many things besides writing on!

This is the COUPON CODE: STPAT20 for the month of February.  Save some "green", 20%, on an order at the Arnold Grummer website.